Decato Structure

Vertical column Ø 65 mm in anodised aluminium profile with grooves. These allow partitions to be attached to any of its seven 45° angle positions or four 90° positions. Standard height 2225 mm end to end.
 
Crossbar Ø 65 mm in anodised aluminium profile with grooves (as vertical column). Maximum allowable span without support: 4m.
Additional corner reinforcement for 90° and 135° angles.

Rectangular, flat monoblock construction. Element thickness 50 mm. Aluminium profile frame, covered in fleece and fabric that’s pin-receptive. Optional skirting duct for cables.
 
The core material of the acoustic version consists of high-performance sound-absorbing rigid gypsum foam, and that of the basic version, a honeycomb panel.

Only PREFORM gives you all this.

Rectangular anodised aluminium rounded profile frame that accepts panels in a wide range of materials such as glass (with optional silver metal venetian blind), acrylic glazing, perforated sheet metal, wood, melamine and grooved aluminium. Optional skirting duct for cables.

Rectangular anodised aluminium rounded profile frame, accepts melamine shelves in light-grey or light pear-wood effect. Optional skirting duct for cables.

Two sizes of glazed area. The lower part is the same as the solid partition. The upper part (820 mm or 1800 mm from floor) has a rectangular anodised aluminium rounded profile frame that accepts clear or screen-printed acrylic glazing or glass. Optional skirting duct for cables.

These attach above the crossbar between standard or extension vertical columns. Available covered in fabric like the solid element, or as per the decorative element in acrylic glazing, perforated sheet metal, wood, melamine and grooved aluminium. Available with or without the aluminium frame.

Solid hinged door in a light-grey melamine finish, or glass door, frameless. Both come with a cylinder lock and an architrave/frame profile which fits between two vertical columns and the crossbar above.
 
Sliding glass door, frameless. Comes with a stainless steel rail and a floor lock.

Electric panel with removable curved or flat aluminium faceplates front and back. Optional skirting duct for cables.
 
Ducting for accepting the host-building’s power supply, communications, etc. High-capacity aluminium cable ducts that attach to the crossbars and vertical columns.

Elements can take an optional skirting duct for cables, with individual ports for cable access. Optional electrical distribution strip accessory that fits onto elements for power supply directly at the workspace.

Optional slotted steel rails can be fitted either side of an element into which accessories can be hooked, such as the magnetic accessory strip, shelves, corner shelves and the electrical distribution strip.
Various other accessories such as trays and racks can be suspended from the magnetic accessory strip.