Decato dp30

Basic elements

• Monoblock construction
• Honeycomb panel core
• Thickness 30 mm
• Aluminium system profile with connection grooves down the sides and along the top. The vertical edges also have grooves to take the optional accessory rails
• Curved covering strip for cosmetically finishing off the edges
• Feet adjustable by up to 15 mm; floor clearance 15 mm
• Dimensions:Standard widths 300 mm to 1800 mm
  Standard heights 300 mm to 1800 mm
  Other sizes within these dimensions are possible

Types of element

Solid elements

• Aluminium system profile with connection grooves down the sides and along the top; fleece and fabric covering; pin-receptive
• Core material: honeycomb panel
• Thickness 30 mm
• Optional vertical accessory slotted rails can be inserted beside the system profile, into which accessories can be hooked

Solid shaped elements
As solid rectangular elements above, but with a curved top. Also available are rounded rectangular solid elements with an internal radius of 1230 mm.


Decorative elements
Anodised aluminium rounded profile, accepts panels in a wide range of materials:

• clear or screen-printed acrylic glazing
• perforated sheet metal RAL 9006
• perforated beech wood
• silver-coloured grooved aluminium
• melamine in light-grey or light pear-wood effect
• melamine in nut tree or fjord birke

Tabletop elements
Short version of the solid elements, fabric-covered, rectangular. The rectangular version is also available with a factory-fitted accessory strip (width 100 mm) for suspending various storage accessories (not retrofittable). The element is held in place by brackets attached to the desk.

Organisation and accessories

Available are slotted steel rails fit either side of an element (user-retrofittable), into which accessories can be hooked, such as:

• shelves and
• magnetic accessory strip, from which can be suspended a range of storage elements of different sizes, like a sorting rack, lengthways or crossways filing tray, pen tray, etc.

Linking and assembly

General

• Linking does not depend on elements or column heights
• The same clips are used for linear connections, and angled ones using a column
• Positions are locked using a screw introduced from above

Linear linking

• Linking clips are made of non-combustible plastic; using two per side, the clips are inserted on one edge of an element or column and the other element is clipped on

Angled linking

Vertical column, Ø 65 mm, aluminium profile

• seven grooves used for clip-linking
• for fixed/flexible 45^o angles with additional variable adjustment +/- 15^o, lockable

Vertical column, Ø 50 mm, aluminium profile

• eight grooves in 45^o steps used for clip-linking
• for fixed angles of 90^o or more

Vertical column, 35 mm square, aluminium profile

• four sides, each with a groove used for clip-linking
• for fixed 90^o angles

Brief assembly instructions

Basically, the elements are linked together via their edges (clip connection, 2 pieces each side), or can be held between desks or structural walls. All elements have adjustable feet to compensate for uneven flooring. It is recommended that adjustments be made before the elements are linked.

For stability, a footplate should normally be fitted every second element, and at the end of a run of elements. They should be fitted before the elements are linked.

Straight runs of elements require stabilising at a maximum of every 3 metres, e.g. using a vertical column for creating a 90^o angle.


The vertical columns can be used to create angles:

• Circular vertical column, Ø 65 mm, for combining with Decato Structure at 45^o angles with additional variable adjustment +/- 15^o
• Circular vertical column, Ø 50 mm, for creating fixed angles of 90^o or more
• 35 mm square vertical column, for creating fixed 90^o angles only

When using counter-tops, suspended shelves, etc. ensure there is sufficient stability by designing corners into the arrangement, attaching outrigger feet or attaching elements to desks or cupboards.

Colours and elements

Colors

Fabrics F Fabric A-Lino Fabric A-Krepp Fabric A-Point

Elements

Elements